news & events

ICON Vehicle Dynamics has developed our two most popular performance steering stabilizer kits for the 2023 and newer Ford Super Duty Pickup platform. Both the ICON Dual 2.0 Steering Stablizer Kit and the ICON 2.5 Centerline Steering Stablizer are now available for the current models of Ford 3/4-ton and 1-ton trucks.

---

THROUGH-SHAFT STEERING STABILIZER KIT

• 65053 23 FSD CENTERLINE STEERING STABLIZER

The ICON Centerline Steering Stabilizer features a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft. FK Rod End bearings provide precise function & feel throughout steering range. Installation is 100% bolt-on using common hand tools and should be an easy job for both professional mechanics and experienced DIY'ers.

KEY FEATURES:

• Through shaft design eliminates the push/pull sensation associated with traditional stabilizers
• Provides symmetrical steering feel throughout input range
• Drastically increased steering damping over stock unit
• Fully rebuildable ICON Vehicle Dynamics 2.5 Series shock
• Piggyback reservoir design
• 6061 hard anodized aluminum shock body provides excellent corrosion resistance
• 7/8” chrome plated induction-hardened steel shaft
• 5WT shock oil for consistent suspension damping along a wide temperature range
• FK Rod End bearings for precise function & feel throughout steering range
• 100% bolt-on installation

TECH INFO:

• TECH NOTE: After installation, cycle steering left and right to ensure full range of steering is achievable and stabilizer is installed correctly
• TECH NOTE: Use ICON 1” front bump stop spacers, part # 61112, unless the suspension system that you are using calls for larger bump stop spacers. If using a non-ICON configuration, cycle the suspension to verify that the stabilizer does not make contact upon full compression.
• TECH NOTE: Mounts over stock front differential cover, not compatible with most aftermarket covers.
• TECH NOTE: Not compatible with aftermarket tie rods
• TECH NOTE: Only compatible with 4WD models

---

DUAL STEERING STABILIZER KIT

• 65002 23 FORD SUPER DUTY DUAL STABILIZER KIT

The ICON Dual Steering Stabilizer System is designed to minimize bump steer feedback and smooth out terrain feedback through the steering system. This kit facilitates mounting dual ICON 2.0 Aluminum Series Steering Shock Absorbers (sold separately) in an opposing configuration. This strategy cancels out the push/pull effect from the internal pressures of the two shocks, providing far greater steering damping compared to single, similarly sized steering stabilizer. Driver "feel" through the steering wheel is greatly improved andthe truck tracks straight down the road. This system bolts to the factory differential cover and wraps around the axle for a secure fit without cutting, welding or drilling. The Shock Absorbers are connected to the tire rod with black anodized billet aluminum clamps for a secure fit and clean finish.

KEY FEATURES:

• Dual opposing design eliminates the push/pull sensation associated with traditional stabilizers
• Dual ICON 2.0 Aluminum Series Steering Shocks offer Increased steering damping over stock unit (shocks sold separately)
• Provides symmetrical steering feel throughout input range
• CNC laser cut steel components
• Semi-gloss black powder coat finish
• 6061 billet aluminum tie rod clamps, anodized for corrosion resistance
• 100% bolt-on installation

TECH INFO:

• TECH NOTE: Requires ICON Steering Stabilizer Shock Part # 36511 (Qty 2)
• TECH NOTE: Only compatible with 4WD models
• TECH NOTE: Not compatible with F-450 or F-550
• TECH NOTE: 2017-2023 trucks require minimum of 2" bump stop spacer. ICON Part # 64037
• TECH NOTE: Not recommended for use with stock height trucks

2.0 STEERING STABILIZER (2 REQUIRED)

• 36511    99-UP FSD 4WD STABILIZER(DUAL OPPOSING) 2.0 VS IR